Water-current-meter-cup-type

Copyright @2021 Vertex Group

Water current meter cup type with Calibration

Model:

  

VSLIC-FM16


This Water Current Meter is used to measure Velocity of water flow directly in m/s. The stainless steel spindle carrying the cup wheel freely rotates

Deflection-of-truss-apparatus-500x500

Copyright @2021 Vertex Group

Deflection of Truss Apparatus

Model:

  

VSLIC-SA15


Apparatus should consist of 4 panels of a PRATT steel truss, each panel being 40cm in horizontal direction and 30cm in vertical direction. Load can

Column-and-struts-apparatus-500x500

Copyright @2021 Vertex Group

Behaviour of Column and Struts Apparatus

Model:

  

VSLIC-SA14


Apparatus consists of four spring steel columns which are put along a vertical wooden

Elastically-coupled-beam-apparatus-500x500

Copyright @2021 Vertex Group

Elastically Coupled Beam Apparatus

Model:

  

VSLIC-SA01


Owing to the industrial experience in this domain, we have been to offer optimum quality Elastically Coupled Beam

Two-hinged-arch-apparatus-500x500

Copyright @2021 Vertex Group

Two Hinged Arch Apparatus

Model:

  

VSLIC-SA13


We have range of high quality of Two Hinged Arch Apparatus. The model should have a span of 100cm and rise 25cm. Both ends should have hinge but one

Deflected-beam-apparatus-500x500

Copyright @2021 Vertex Group

Deflected Beam Apparatus

Model:

  

VSLIC-SA03


We offer optimum quality of Deflected Beam Apparatus.Apparatus should of consists of a mild steel beam 2.5cm x 3mm in cross section and 100cm long,

Unsymmetrical-bending-apparatus-500x500

Copyright @2021 Vertex Group

Unsymmetrical Bending Apparatus

Model:

  

VSLIC-SA10


We are one of the leading manufacturers, suppliers and exporters of Unsymmetrical Bending Apparatus.Apparatus should consist of a mild steel angle

Three-hinged-arch-apparatus-500x500

Copyright @2021 Vertex Group

Three Hinged Arch Apparatus

Model:

  

VSLIC-SA06


Our precious clients can avail from us an exclusive array of Three Hinged Arch Apparatus.The mild steel model should have a span of 100cm and rise

Electrical-resistance-strain-gauge-500x500

Copyright @2021 Vertex Group

Electrical Resistance Strain Gauge

Model:

  

VSLIC-SA08


The apparatus has been designed to illustrate the basic features of electrical resistance strain gauges and their application to measurement of

Maxwell-reciprocal-theorem-apparatus-500x500

Copyright @2021 Vertex Group

Clarkes Maxwell Reciprocal Theorem Apparatus

Model:

  

VSLIC-SA02


Apparatus for Verification of Clarkes Maxwell Reciprocal Theorem Apparatus.Apparatus should consists of a mild steel beam 100cm long and 1.25cm x

Redundant Joint Apparatus

Copyright @2021 Vertex Group

Redundant Joint Apparatus

Model:

  

VSLIC-SA07


In our extensive range of products, we offer our esteemed clients a broad array of high quality Redundant Joint Apparatus.Apparatus should consists


Copyright @2021 Vertex Group

Series & Parallel Pump Test Rig (Multi Stage)

Model:

  

VSLIC-HL01


Two identical pumps operated in parallel approximately double the discharge while preserving the same head. Likewise, when two identical pumps should

Francis Turbine Test Rig

Copyright @2021 Vertex Group

Francis Turbine Test Rig

Model:

  

VSLIC-HL02


This is a reaction turbine and this test rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the


Copyright @2021 Vertex Group

Hele shaw apparatus

Model:

  

VSLIC-HL03


A bench-mounting Hele-Shaw apparatus to demonstrate two-dimensional laminar flow around differently shaped models. The apparatus works with a steady,

Gear Pump Set

Copyright @2021 Vertex Group

Gear Pump Set

Model:

  

VSLIC-HL04


The unit is a self-contained re-circulating type unit. All the measurements are provided to evaluate the performance of the gear pump. Gear pumps are


Copyright @2021 Vertex Group

Centerefugal Pump Set

Model:

  

VSLIC-HL05


This Centerefugal pump set are dynamic pressure pumps. This is a self-contained recirculation type unit all the measurement are provided to


Copyright @2021 Vertex Group

Pelton wheel turbine

Model:

  

VSLIC-HL06


This unit shows the construction and working of Pelton Wheel Turbine It consists of pelton wheel rotate by the jet of water supplied from centrifugal


Copyright @2021 Vertex Group

Kaplan Turbine Test Rig

Model:

  

VSLIC-HL07


This is a reaction turbine and this test rig shows the construction and working of Kaplan turbine. Rope brake dynamometer is used to measure the


Copyright @2021 Vertex Group

Flow Through Mouthpiece & Orifice apparatus

Model:

  

VSLIC-FM17


We introduce ourselves as an eminent manufacturer, trader and supplier of Orifice and Mouthpiece Apparatus.  Measurement of flow constitutes an


Copyright @2021 Vertex Group

Flow Measurement Venturi Meter

Model:

  

VSLIC-FM11


In our extensive product range, we have available with us a supreme range of Flow Measurement Venturi Meter.Experimental setup for measurement of

Impact-of-jet-apparatus-vertex

Copyright @2021 Vertex Group

Impact of Jet Apparatus

Model:

  

VSLIC-FM10


Vertex presenting you a high-quality Impact of jet apparatus. Designed in compliance with industry-leading parameters, it is used to study the forced


Copyright @2021 Vertex Group

Losses In Pipe Appratus

Model:

  

VSLIC-FM09


Our organization holds specialization in the manufacturing, suppliying and exporting of high quality Losses in Pipes Apparatus. An apparatus for

Double Effect Evaporator

Copyright @2021 Vertex Group

Double Effect Evaporator

Model:

  

VSLIC-HM23


Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the

Single Effect Evaporator

Copyright @2021 Vertex Group

Single Effect Evaporator

Model:

  

VSLIC-HM22


Technical Description: Evaporation Deals With The Concentration Of A Non-Volatile Solute From A Solution By The Removal Of Required Amount Of

Open Pan Evaporator

Copyright @2021 Vertex Group

Open Pan Evaporator

Model:

  

VSLIC-HM03


Evaporation Is A Process For Concentrating A Solution By Vaporizing Part Or All Of The Solvent. In Most Of The Cases The Solvent Is Water. The Pan

Finned Tube Heat Exchanger

Copyright @2021 Vertex Group

Finned Tube Heat Exchanger

Model:

  

VSLIC-HM27


We have emerged as affluent manufacturer and supplier of Finned Tube Heat Exchanger. This is energy efficient and require less maintenance as

Emissivity Measurement Apparatus

Copyright @2021 Vertex Group

Emissivity Measurement Apparatus

Model:

  

VSLIC-HM21


Owing to our expertise and domain knowledge, We at "Global Luminous" have been able to offer Emissivity Measurement Apparatus at an industry leading

Boiling Heat Transfer Unit

Copyright @2021 Vertex Group

Boiling Heat Transfer Unit

Model:

  

VSLIC-HM20


We are a Leading Manufacturers, Suppliers & Exporters of Boiling Heat Transfer

Two-Phase-Heat-Transfer-Unit

Copyright @2021 Vertex Group

Two Phase Heat Transfer Unit

Model:

  

VSLIC-HM19


In order to meet the particular demands of the customers, we are providing them a personalized assortment of Two Phase Heat

Critical Heat Flux Apparatus

Copyright @2021 Vertex Group

Critical Heat Flux Apparatus

Model:

  

VSLIC-HM18


Successive regions of pool boiling phenomenon namely: Natural convection boiling and accompanies the Nucleate boiling. Can be visualized up to the

Unsteady State Heat Transfer Unit

Copyright @2021 Vertex Group

Unsteady State Heat Transfer Unit

Model:

  

VSLIC-HM17


The Apparatus Consists Of A Small Test Cylinder. The Cylinder Is Heated By A Constant Temperature Water Bath, Till Steady State Is Reached. During

Dropwise Filmwise Condensation Apparatus

Copyright @2021 Vertex Group

Dropwise Filmwise Condensation Apparatus

Model:

  

VSLIC-HM02


Drop Film Condensation Apparatus is widely used for determining and comparing the surface heat transfer coefficient for Dropwise condensation and

Plate Type Heat Exchanger

Copyright @2021 Vertex Group

Plate Type Heat Exchanger

Model:

  

VSLIC-HM13


Technical Description: Plate type heat exchanger consists of frame in which independent metal plates are clamped between a head and follower. The

Stefan-Boltzmann-apparatus-new

Copyright @2021 Vertex Group

Stefan Boltzmann apparatus

Model:

  

VSLIC-HM15


The apparatus is designed to determine, the Stefan Boltzmann constant. The apparatus consists of a hemisphere fixed to a Bakelite plate, the outer


Copyright @2021 Vertex Group

Shell And Tube Heat Exchanger

Model:

  

VSLIC-HM08


Shell and Tube Heat Exchanger are popular in process industries because they occupy less space and offer reasonable temperature drop. The apparatus

Thermal Conductivity By Guarded Hot Plate Method

Copyright @2021 Vertex Group

Thermal Conductivity By Guarded Hot Plate Method

Model:

  

VSLIC-HM24


The Guarded Hot Plate instrument measures the Thermal conductivity of insulation

Thermal Conductivity Of Insulting Powder

Copyright @2021 Vertex Group

Thermal Conductivity of Insulting Powder

Model:

  

VSLIC-HM11


This apparatus is designed to determine the thermal conductivity of insulating powder. The apparatus consists of two thin walled concentric copper

Thermal Conductivity Of Insulating Slab

Copyright @2021 Vertex Group

Thermal Conductivity of Insulating Slab

Model:

  

VSLIC-HM09


The set-up is designed to determine Thermal Conductivity of Insulating Slab. The apparatus consists of the main central heater and ring guard heater,

Thermal Conductivity Of Metal Rod

Copyright @2021 Vertex Group

Thermal Conductivity of Metal Rod

Model:

  

VSLIC-HM07


The experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the

Heat Transfer In Agitated Vessel

Copyright @2021 Vertex Group

Heat Transfer In Agitated Vessel

Model:

  

VSLIC-HM12


In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by

Heat Transfer Through Composite Walls

Copyright @2021 Vertex Group

Heat Transfer Through Composite Walls

Model:

  

VSLIC-HM10


The Heat Transfer Through Composite Wall setup consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either

Heat Transfer Through Lagged Pipe

Copyright @2021 Vertex Group

Heat Transfer Through Lagged Pipe

Model:

  

VSLIC-HM16


The setup is designed and fabricated to study lagging phenomenon in case of pipes. It consists of three concentric pipes of small thickness as

Heat-Transfer-In-Natural-Convection.jpg

Copyright @2021 Vertex Group

Heat Transfer In Natural Convection

Model:

  

VSLIC-HM06


The setup consists of a brass tube fitted in a rectangular duct in a vertical position. The duct is open at the top and bottom, and forms an

Heat Transfer In Forced Convection

Copyright @2021 Vertex Group

Heat Transfer In Forced Convection

Model:

  

VSLIC-HM01


The apparatus consists of blower unit fitted with the test pipe. Nichrome wire heater surrounds the test section. Four Temperature Sensors are

Heat Transfer From Pin Fin

Copyright @2021 Vertex Group

Heat Transfer From Pin Fin

Model:

  

VSLIC-HM05


The setup is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in a duct. A fan is provided on one side of duct to

Heat-Pipe-Demonstrator

Copyright @2021 Vertex Group

Heat Pipe Demonstrator

Model:

  

VSLIC-HM04


It is a super-conducting device and involves the transfer of heat by boiling and condensation of a fluid and hence transfer of heat takes place under

Pipe Fitting Apparatus

Copyright @2021 Vertex Group

Pipe Fitting Apparatus

Model:

  

VSLIC-FM15


Pipe Fitting Apparatus. The setup consists of a 1/2 bend and elbow, a sudden expansion sudden contraction fitting from 15mm to 25mm, ball valve, and

Hydraulic-bench-apparatus-500x500.jpg

Copyright @2021 Vertex Group

Hydraulic Bench (With 7 Experiments)

Model:

  

VSLIC-FM08


We are a reputed manufacturer and supplier of superior quality Hydraulic Bench. This is a water re-circulation system consisting of a water sump

Gear Pump Test Rig Setup Experiment

Copyright @2021 Vertex Group

Gear Pump Test Rig Experiment

Model:

  

VSLIC-FM01


Expertized in manufacturing, supplying and exporting Gear Pump Test Rig. The unit is a self contained recirculation type unit. All the measurements

Free-forced-vertex-500x500

Copyright @2021 Vertex Group

Free & Forced Vortex Tube Apparatus

Model:

  

VSLIC-FM07


Leveraging on our vast industry experience, we offer an extensive range of Free & Forced Vortex Tube Apparatus. It consists of a transparent

Centrifugal-pump-test-rig

Copyright @2021 Vertex Group

Centrifugal Pump Test Rig

Model:

  

VSLIC-FM06


To accomplish an apex position in the industry, we are dedicated to serve with quality 1 hp Centrifugal Pump Test Rig. Centerefugal pump are dynamic

Discharge-through-venturimeter-500x500.jpg

Copyright @2021 Vertex Group

Discharge Through Venturimeter & Orificemeter

Model:

  

VSLIC-FM05


The apparatus consists of two pipelines emerging out from a common manifold. One pipe line contain a Venturimeter and other contains an Orifice. The

Reynolds-apparatus

Copyright @2021 Vertex Group

Reynold’s Apparatus

Model:

  

VSLIC-FM04


Reynolds Apparatus is used to study laminar, transitional, and turbulent flow. Features a transparent tank with an adjustable overflow pipe. Water

Discharge-over-notches-apparatus

Copyright @2021 Vertex Group

Notch Apparatus

Model:

  

VSLIC-FM03


The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of

Metacentric-height-apparatus

Copyright @2021 Vertex Group

Metacentric Height Apparatus

Model:

  

VSLIC-FM02


Determines the metacentric height of a floating body and height variation with tilt angle. Rectangular pontoon. Center of gravity can be moved