+91-9999 5737 81 +91 9871930011 sales@vertexinstruments.com Sitemap

Saybolt Viscometer with Four Saybolt Tubes VSLIC-B159

short info

A Saybolt Viscometer with Four Saybolt Tubes measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries. Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.

Standard

ASTM D88 and IS:3117-2019

Model

VSLIC-B159

Origin

Indian

Make/ OEM

VERTEX

get a quote  

  • Description

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL

OVERVIEW

A Saybolt Viscometer with Four Saybolt Tubes, as per ASTM D88 and IS:3117-2019, measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries.Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.

Complies with ASTM D 88 / IS:3117-2019

The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60 ml sample to flow through a tube with a specified diameter (Furol (3.150 mm) or Universal (1.765 mm) ) is measured and reported in seconds. The viscometer can be used for temperatures between 25°C and 50°C. The viscometer includes Waterbath, Motorized Stirrer, Electric Heater with Digital Temp. Controller with control accuracy of ± 0.1°C. (The room temp. must be @ 20-21°C to achieve control accuracy)

Construction Details: 

  1. The apparatus consists of stainless steel bath with two sample cups
  2. The bath has a lid which contains a thermometer socket and a straight heater. 
  3. Temperature is controlled by PID Digital Temperature indicator cum controller
  4. Stirring is done by FHP motorized stirrer. 
  5. A thermometer can be inserted into the cup cover to cross check the Digital controller. 
  6. Four jets – Two Universal and Two Furol can be screwed to the cup by a handle. 
  7. Entire assembly works on 220 Volt, 50 hz, Single phase, AC Supply
  8. Universal Orifice: 2 pc
  9. Furol Orific : 2 pc
  10. Thermometer Support: 4 pc
  11. Tube wrench : 1 set
  12. Saybolt Viscosity Flask, Glass, 60 ml: 4 pc
  13. Stopper : 4 pcs
  14. Operation Instruction Manual & Conformity Certificate : 1 Pc

The Following accessories are available at extra cost

  1. ASTM/IP Glass Thermometers
  2. Digital Stop Watch (Essential accessory)
  3. Withdrawal Tube
  4. Strainer for Filtering


Related Searches

SPECIFICATIONS

A Saybolt Viscometer with Four Saybolt Tubes, as per ASTM D88 and IS:3117-2019, measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries.Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.

Complies with ASTM D 88 / IS:3117-2019

The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60 ml sample to flow through a tube with a specified diameter (Furol (3.150 mm) or Universal (1.765 mm) ) is measured and reported in seconds. The viscometer can be used for temperatures between 25°C and 50°C. The viscometer includes Waterbath, Motorized Stirrer, Electric Heater with Digital Temp. Controller with control accuracy of ± 0.1°C. (The room temp. must be @ 20-21°C to achieve control accuracy)

Construction Details: 

  1. The apparatus consists of stainless steel bath with two sample cups
  2. The bath has a lid which contains a thermometer socket and a straight heater. 
  3. Temperature is controlled by PID Digital Temperature indicator cum controller
  4. Stirring is done by FHP motorized stirrer. 
  5. A thermometer can be inserted into the cup cover to cross check the Digital controller. 
  6. Four jets – Two Universal and Two Furol can be screwed to the cup by a handle. 
  7. Entire assembly works on 220 Volt, 50 hz, Single phase, AC Supply
  8. Universal Orifice: 2 pc
  9. Furol Orific : 2 pc
  10. Thermometer Support: 4 pc
  11. Tube wrench : 1 set
  12. Saybolt Viscosity Flask, Glass, 60 ml: 4 pc
  13. Stopper : 4 pcs
  14. Operation Instruction Manual & Conformity Certificate : 1 Pc

The Following accessories are available at extra cost

  1. ASTM/IP Glass Thermometers
  2. Digital Stop Watch (Essential accessory)
  3. Withdrawal Tube
  4. Strainer for Filtering

FEATURES

A Saybolt Viscometer with Four Saybolt Tubes, as per ASTM D88 and IS:3117-2019, measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries.Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.

Complies with ASTM D 88 / IS:3117-2019

The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60 ml sample to flow through a tube with a specified diameter (Furol (3.150 mm) or Universal (1.765 mm) ) is measured and reported in seconds. The viscometer can be used for temperatures between 25°C and 50°C. The viscometer includes Waterbath, Motorized Stirrer, Electric Heater with Digital Temp. Controller with control accuracy of ± 0.1°C. (The room temp. must be @ 20-21°C to achieve control accuracy)

Construction Details: 

  1. The apparatus consists of stainless steel bath with two sample cups
  2. The bath has a lid which contains a thermometer socket and a straight heater. 
  3. Temperature is controlled by PID Digital Temperature indicator cum controller
  4. Stirring is done by FHP motorized stirrer. 
  5. A thermometer can be inserted into the cup cover to cross check the Digital controller. 
  6. Four jets – Two Universal and Two Furol can be screwed to the cup by a handle. 
  7. Entire assembly works on 220 Volt, 50 hz, Single phase, AC Supply
  8. Universal Orifice: 2 pc
  9. Furol Orific : 2 pc
  10. Thermometer Support: 4 pc
  11. Tube wrench : 1 set
  12. Saybolt Viscosity Flask, Glass, 60 ml: 4 pc
  13. Stopper : 4 pcs
  14. Operation Instruction Manual & Conformity Certificate : 1 Pc

The Following accessories are available at extra cost

  1. ASTM/IP Glass Thermometers
  2. Digital Stop Watch (Essential accessory)
  3. Withdrawal Tube
  4. Strainer for Filtering

PRODUCT VIDEO

WORKING PRINCIPALNew

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

Our Youtube Channel

Subsribe for New Video's.

Semi Automatic Compression Testing Machine

Concrete PAN Mixer upto 200Ltrs.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE

2023 Vertex Group. All rights reserved | Privacy | Copyright | Sitemap | MAKE IN INDIA(MII)