Flash Point (Closed) Pensky-Martens Apparatus VSLIC-OP104
short info
Standard
Model
Origin
Make/ OEM
short info
Standard
Model
Origin
Make/ OEM
Compliance with following international standards:
IS 1209, IS 1448: Part 21, IS 1448: Part 66, ASTM D93, ISO 2719, IP 34, JIS K2265-3
Purpose:
This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 49° C (50° C ‑ 360° C).
These test methods cover the determination of the flash point of petroleum products in the temperature range from 40 to 360° C by a manual Pensky Martens Closed Cup Apparatus.
Brief Construction Details:
AT EXTRA COST
Compliance with following international standards:
IS 1209, IS 1448: Part 21, IS 1448: Part 66, ASTM D93, ISO 2719, IP 34, JIS K2265-3
Purpose:
This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 49° C (50° C ‑ 360° C).
These test methods cover the determination of the flash point of petroleum products in the temperature range from 40 to 360° C by a manual Pensky Martens Closed Cup Apparatus.
Brief Construction Details:
AT EXTRA COST
Compliance with following international standards:
IS 1209, IS 1448: Part 21, IS 1448: Part 66, ASTM D93, ISO 2719, IP 34, JIS K2265-3
Purpose:
This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 49° C (50° C ‑ 360° C).
These test methods cover the determination of the flash point of petroleum products in the temperature range from 40 to 360° C by a manual Pensky Martens Closed Cup Apparatus.
Brief Construction Details:
AT EXTRA COST