Furnace Working Temperature Range: 1400°C
Furnace Working Size: 9″ x 4″ x 4″
Product Overview
- Furnace Internal size : 9″ width X 9″ height X 18″ depth
- Furnace hot zone volume : 9″ width X 9″ height X 18″ depth
- Furnace entrance size : 9″ width X 9″ height
- Insulation : High grade pressed zirconium Blanket ceramic Fibber and insulation brick, insulation thickness will be 250mm approx.
- Chamber : Chamber made of high alumina cumulate brick 90% alumina temp 1600 max
- Front Loading with Suitable Opening Door Mechanism
- Shell Construction: Double Walled High quality fabrication of M.S.Body. Angle frame 40/4 and M. S. sheet 14 SWG, Front Plate 8 mm Thickness Structure with Proper Stiffeners and neatly powder coated
- Door Construction: Sophisticated system to avoid heat loss with proper insulation
HEATING SYSTEM
- Heating Elements : Silicon carbide rood (12 numbers with even Distribution) Element is Two Side left & Right
- Type of element : Solid type
- Hot zone length : 200 mm
- Total length of element : 650mm
- Outer Diameter : 18 MM
- Resistance of the element : 1.74 ohms
- Operation : Three phase
- Power : 9 kW line lord
- Maximum temperature : 1450 C
- Working temperature : 1400 C (For continuous operation) 4-6 hours
- Electrical line requirement : 100A – MCB (Three phase with neutral) has to be arranged by the customer
CONTROL SYSTEM
- Temperature control : Digital Temperature controller will be a PID automatic control Power control and programmable with Necessary safety features. With ramp soak
- Including 4 programming memories & at least 8 ramp temperature and holding time.
- Temperature sensor : Pt+Rh13%/Pt – ‘R’ type thermocouple along With Recrystallized alumina beads and Sheath
- Power control: MCB Mains
- Indications: a) Amp meter b) pilot indicating light C) Mains Indicator d) Output Indicator
- Control switches : Mains on, out put on
- Safety Control : Over heat safety cut-off of safety controller provided
