short info

Marshall Stability Test Apparatus 50kN Capacity Digital Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.

Standard

ASTM D1559 BS:598-197, EN-12697-34

Model

VSLIC-B123

Origin

Indian

Make/ OEM

VERTEX

  • Description

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL

OVERVIEW

  • The machine comprises of a robust and compact two-column frame with an adjustable upper crossbeam.
  • The unit is a bench mounting compression frame with motor and worm gear housed within the base unit.
  • The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the data acquisition and control unit.
  • For safety, the up and down travel of the lower platen is limited to the use of limit switches.
  • Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.
  • The machine can be hand operated by a lateral hand wheel for calibration purposes.
  • The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the breaking head.
  • The Digital Marshall Stability Machine is suitable for testing 6” dia & 4” dia. specimens conforming to ASTM D5581.



SPECIFICATIONS

Premium Digital Marshall Stability Test Apparatus Features

  • The 50kN Capacity Digital Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.
  • The machine comprises of a robust and compact two-column frame with an adjustable upper crossbeam.
  • The unit is a bench mounting compression frame with motor and worm gear housed within the base unit.
  • It is designed to operate with a minimum of maintenance.
  • The Platen rate is 50.8 mm/min also maintained under load thanks to an overpowered electric motor.
  • For safety, the up and down travel of the lower platen is limited to the use of limit switches.
  • Rapid adjustment of the platen is controlled using the up and down buttons on the digital readout unit.
  • The machine can be hand operated by a lateral hand wheel for calibration purposes.
  • The measuring system consists of a 50 kN capacity Load cell fitted to the upper cross beam to read stability values and the 25 x 0.01 mm Displacement Sensorfitted to the Breaking Head.
  • The Digital Marshall Stability Test Machine is supplied complete with LCD Control Unit, 50 kN capacity Load cell, Breaking Head (Stability Mould) for Ø 4″ Marshall samples, and 25 mm Displacement Sensor.
  • For Tensile Splitting Device and Indirect Tensile Test Jig for Compacted Bituminous Samples with 25×0.01 mm Analog Dial Gauge for Ø 100 mm (4”) & Ø 150 mm (6”) samples should be ordered separately.

Other Details

  • Automatic Marshall Stability Test Machine, 50 KN, 220-240 V 50-60 HZ
  • Breaking Head (Stability Mould) 4” & 6”
  • Linear Potentiometric, Displacement Transducer, 25×0.001 mm with Bracket.
  • Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4″) Dia.
  • EN 12697-34, 12697-23, 12967-12, ASTM D1559, D5581, D 6927; AASHTO T245

The Digital Marshall Stability Test Machine is supplied complete with:

  • Load cell
  • Linear potentiometric displacement transducer with bracket
  • Also Handwheel for manual control
  • Breaking head 4Inch & 6Inch

FEATURES

Main Features

  • Automatically calculates flow and stability values
  • Can make a test with displacement and limited load control
  • Real-time display of test graph.
  • CPU card with 32-bit Arm RISC architecture
  • Permanent storage capacity up to 10000 test results.
  • 4 analog channels, 2 channels are active for marshall test
  • Programmable digital gain adjustment for load-cell, pressure transducers, strain-gauge based sensors, potentiometric sensors, voltage, and current transmitters
  • 1/256000 points resolution per channel
  • 800×480 resolution 65535 color TFT-LCD industrial touchscreen
  • Main function keys
  • Multi-language support
  • 3 different unit system selection; kn, ton, and lb
  • Real-time clock and date
  • Test result visualization and memory management interface

PRODUCT VIDEO

WORKING PRINCIPALNew

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE