short info

Used for determining the workability of building lime.

It comprises :

  • One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.
  • A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.

Standard

IS 1199-1959, ASTM C-124, AASHTO-T-120.

Model

VSLIC-C108

Origin

Indian

Make/ OEM

VERTEX

  • Description

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL

OVERVIEW

Used for determining the workability of building lime.

It comprises :

  • One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.
  • A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.
  • Truncated conical mould 65 mm inside dia at the bottom, 40 mm inside dia at top and 90 mm high.
  • A machined table top 250 mm dia of Gun metal fitted with a vertical shaft. Total weight 4.00 ± 0.05 kg.
  • A cast iron frame with a machined base and a smooth vertical hole at the top for the table shaft. It has a horizontal shaft carrying a cam at one end and a hand wheel at the other. The cam allows 12 mm free drop of the table.
  • A conical mould 100 mm inside dia at bottom, 70 mm inside dia at top and 50 mm high.

Same as VSLIC-C107 but provided with a motor drive for operation of the cam at about 60 r.p.m. to give approximately one drop per second to the table top.

Suitable for operation on 220 V, 50 Hz, Single phase supply.



SPECIFICATIONS

Used for determining the workability of building lime.

It comprises :

  • One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.
  • A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.
  • Truncated conical mould 65 mm inside dia at the bottom, 40 mm inside dia at top and 90 mm high.
  • A machined table top 250 mm dia of Gun metal fitted with a vertical shaft. Total weight 4.00 ± 0.05 kg.
  • A cast iron frame with a machined base and a smooth vertical hole at the top for the table shaft. It has a horizontal shaft carrying a cam at one end and a hand wheel at the other. The cam allows 12 mm free drop of the table.
  • A conical mould 100 mm inside dia at bottom, 70 mm inside dia at top and 50 mm high.

Same as VSLIC-C107 but provided with a motor drive for operation of the cam at about 60 r.p.m. to give approximately one drop per second to the table top.

Suitable for operation on 220 V, 50 Hz, Single phase supply.

FEATURES

Used for determining the workability of building lime.

It comprises :

  • One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.
  • A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.
  • Truncated conical mould 65 mm inside dia at the bottom, 40 mm inside dia at top and 90 mm high.
  • A machined table top 250 mm dia of Gun metal fitted with a vertical shaft. Total weight 4.00 ± 0.05 kg.
  • A cast iron frame with a machined base and a smooth vertical hole at the top for the table shaft. It has a horizontal shaft carrying a cam at one end and a hand wheel at the other. The cam allows 12 mm free drop of the table.
  • A conical mould 100 mm inside dia at bottom, 70 mm inside dia at top and 50 mm high.

Same as VSLIC-C107 but provided with a motor drive for operation of the cam at about 60 r.p.m. to give approximately one drop per second to the table top.

Suitable for operation on 220 V, 50 Hz, Single phase supply.

PRODUCT VIDEO

WORKING PRINCIPALNew

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE